The Druid's Garden

Spiritual Journeys in Tending the Land, Permaculture, Wildcrafting, and Regenerative Living

A Fire and Smoke Ritual for Land Healing and Blessing May 5, 2019

A few years ago, I led a smoke cleansing (smudge) stick making workshop at the OBOD’s East Coast Gathering event. As that event often has upwards of 100 attendees, I spent months growing and harvesting materials for the event so that everyone could make 1-2 sticks.  Sure enough, everyone got to make some smudge sticks and the workshop went great.  After the workshop, one of my friends and event fire tenders, Derek, came up to me and asked me about the leftover materials.  I had been placing them in a paper bag, and had planned on taking them home to make more sticks or return to the land. He said, “I want to make a smudge bomb and send healing smoke to this entire land.”  I said, “Yes, what a great idea!” So we tightly bundled up the remainder of the material, which filled at least 1/3 of the paper grocery bag, and wrapped it with the same cloth string.  The next day, as the Ovates were meeting around the fire circle in preparation for ritual, he brought out the smudge bomb.  The previous night’s fire had been a particularly large one, and in the morning, it still contained the embers from the fire the night before. Derek carefully placed the smudge bomb into the glowing embers.  It worked just as we hoped: it smoldered and sent up a healing and blessing smoke into the surrounding land. And it lasted quiet a long time!  Ever since that experience, I’ve been working with fire in different ways to think about how we might use fire and smoke to bless and heal large spaces, and how we can also make offerings in thanks to fire, humanity’s oldest friend and companion.  Today’s post compiles some of those ideas, big and small and is a follow-up to my ancestral Beltane fire post from last week.

 

Altar with various bundles, getting ready to burn

Land Healing through Fire and Smoke: A Fire and Smoke Ritual  in Three Parts

Using the “smudge bomb” experience for inspiration, I developed a larger technique for using fire and smoke for land healing and blessing, creating specific ritual objects that are created in a sacred manner and then burned to send that energy, by way of smoke and wind, to far off places.  As I described in my earlier series on land healing, land healing comes in many forms.  Energetic healing or palleative care can be useful in situations where the land is actively under duress (which unfortunately describes many places on earth currently), where physical land healing (through permaculture, seed scattering, etc) is not an option. One of the challentes with land healing, particularly on a larger scale, is that you don’t always have physical access to the land you want to heal.  I do think that doing ritual directly on the lands you want to heal is most effective–but doing something else at a distance can be equally as effective if you have some good way of transmitting that energy.  Thus, this ritual technique is very useful for spaces, far and wide, that are otherwise inaccessible: around here that would be large swaths of logging, strip mines, polluted waterways, etc.  It is also very useful for healing more distant concerns: the plight of polar bears in the Arctic or deforestation in the Amazon, the oceans, or some other “far away” issue.  Or maybe you want to do land healing working for the entire globe. Thus, this technique is one that you can use to send healing and blessing energy to the lands nearby–or quite distant, using air and smoke as a carrier.

 

Smoke is often seen in today’s culture very negatively primarily because of our challenged relationship with tobacco: we have secondhand smoke, smoking as a harmful and life-threatening, smoke from wildfires causing issues, and  much more. And yet, smoke cleansing and blessing practices have been used throughout human history and in many cultures as a blessing and purifying agent (this link has a nice overview; this link is a study to over 250 plants used in smoke healing around the world).  In the druid tradition and in other pagan traditions, we use these practices quite a bit: through smoke cleansing (smudge) sticks, incense, using tree resins– smoke helps us call in and establish air in ceremonies and connect deeply with that element.  We often use smoke clearing, incense and similar such things on a smaller scale–but why not consider it on a large-scale for land healing or blessing?

 

Thus this technique has three parts.  Each of these three parts has both a physical component and an energetic component. The parts are:

1. Creating a bundle or object that will turn to smoke and bring that energy, through the currents of the air, to other places.

2. Creating a fire in a sacred manner and opening a sacred space.

3. Burning and releasing the bundle and directing energy.

(And then, of course, closing out your space and giving thanks. )

 

Part 1: Making Your Healing Bundle / Healing Object

Now, I’ll walk through some potential options for how to create your own healing bundle.  I am giving you options below to spark your own creativity, s.  Before we get into the bundles, I want to offer a few general principles:

 

  • *Everything* in these bundles should be all natural, coming directly from nature. This is because you are burning the objects, so obviously, you don’t want to burn something that pollutes the air.  So for example, if you are using string, it should be cotton, hemp or jute (string can be plastic), wax (use soy wax or beeswax).  Because non-natural materials can release harmful chemicals into the air, thereby rendering any particular healing work you want to do ineffective.
  • Like most magical workings, I think its less important the physical form it takes and more the intentions you bring with it.  Work with what you have and don’t worry about replicating what I have here–rather, create things from your local environment that speak to you.
  • Look for opportunities: a fallen conifer branch, a neighbor trimming a hedge of rosemary or hemlock, a huge number of pinecones, abundant material on your own land, etc.
  • At the same time, a larger size bundle certainly does give a good ritual effect, which is something you might want to consider.  Small ones work great too, but large ones burn longer, giving you more time to focus healing energies in a particular direction.

Three sample bundles: pine cone/herb bundle, wood burned oak slab, and bundle of sticks wrapped with prayers and sealed with wax.

There are two kinds of bundles you can make: things that are meant to smolder and things that are meant to burn. Things that smolder  are more traditionally used like incense on coals, and are designed to be added to existing coals or a slow burning fire.  Things that burn, on the other hand, are designed to burn when a fire is hot (and usually are wooden in some way).

 

Some Possibilities for Things that Smolder:

 

The Herbal Healing Bundle: This technique uses a bundle of aromatic dried healing herbs, very similar to the “smudge bomb” I described in my opening–a mix of carefully chosen herbs for their healing effects.  You can design a specific bundle for a specific healing purpose based on the herbs that you choose (see my list here).  I like to create these at the end of the season, when I’m clearing out my garden, and I have to cut plants back anyways.  This is also a great use of the stalks of plants; so if I’m harvesting sage, rosemary, wormwood, tobacco, and other plants, after I harvest the leaves, I am often left with a lot of stalk matter that I don’t know what to do with–and it goes in the bundle.  Any material (other than poison ivy) would work fine for such a bundle, but I think it’s particularly good with aromatic healing herbs that burn well–rosemary, sage, thyme, mint, scented geranium, wormwood, mugwort, etc.   For this technique, if you are using dried herbs, I suggest using a paper bag (which you can write your intentions on and then place the herbs inside) and wrap it tight with cotton string.  Depending on the nature of the herbs, you might be able to make your bundle without the bag, especially if you have a lot of long plant stalks, etc.  If you are using green/fresh herbs, you probably want to just bundle them without the bag using cotton string so that they will have a chance to dry out.  If you don’t grow your own herbs and/or don’t do wild foraging, this options probably isn’t as good for you as it requires a good amount of herbs and obtaining them may be more cost prohibative.  Never fear, there are many other options!

 

The Resin and Herb Bundle:  Conifer resins are a great addition to the herbal healing bundle; they smolder and produce a very good deal of smoke and last for a long time.  You can add conifer resins to a standard herbal healing bundle or use them on their own.  You don’t want to throw these directly in a fire; they are better off smoldering on coals.  You can also add conifer needles and branches, which will sometimes crackle and pop.

 

Pine cone bundle – this was for blessing the conifers of the land

Pine cone / Herb Bundle: Pine cones make great smoldering options, as they often contain a lot of resin in them.  I like to sprinkle my pine cones with herbs and then bind them together.

 

Shapes, Rings, and Effigies: Rather than putting your materials in a bag, you might instsead choose to shape some form–a wreath, for example, offers additional symbolism. Certain kinds of herbs and plants are obviously better for this than others.  An easy way to do this is to get a wooden ring started (see my instructions here for how I did this for a different project) and then from there, you can use cotton string to wrap dried or fresh herbs around the ring, layering until you have somehing you are happy with.

 

Things that Burn:

The Conifer Bundle: Conifer trees love to burn, and many of them have needles that are flamable, even when they are green and not dried out.  Eastern white cedar and other cedars, in particular, goes up well.  You can create a bundle of fresh or dried conifer boughs (or create a wreath or other shape).  This would be a good way to use up material from your Yule tree or else if you or a neighbor were trimming hedges of confiers, etc.   Bundle them up with cotton string and watch the sparks fly!

 

The Wax and Herb Bundle: An alternative to the large bundle described above uses beeswax candles wraped in herbs.  Beeswax will burn very brightly and leave off powerful light, and thus, is particularly good when you want to be bringing energy into a situation.  Take 1-2 beeswax candles (or a small brick of beeswax) and then layer the outside with herbs.  Or, you can heat wax up till its just soft, and then, roll herbs into the candle.  When you throw this into the fire, it will burn brightly and send energy outward quickly.

 

The Wooden Message Bundle: A final option is to use wood itself to fashion something–a bundle of sticks, wrapped with messages or healing words.  A wooden round with wood burning or natural ink messages, a wooden object bound together with string; a vine wreath with tucked in messages, and so on.  The sky is really the limit here.

Burning a Land Healing and Blessing Slab at Beltane

This first photo is for a simple healing for my own land; working with a wooden slab that I created and later burned ritually.  My own land was damaged through logging the year before I bought it, and I’ve been doing a lot of healing work here.  Burning this in a central fire helped send that blessing energy out to the land (and after burning it, to help further the intention, I did some cleaning up of a burn pile left by the previous owners that I had found a few weeks earlier).

Prayers for the world bundle

The second was a more in-depth bundle I created for holding space for species in decline and in danger of extinction and for ecosystems under direct threat. Each of the sticks in the bundle was a message that I wrote and tied to each stick; each stick became part of the larger bundle, which I sealed with wax. Each of these prayers were global in nature, thus, the smoke would carry the energy where it needed to go.

 

Part 2: A Sacred Fire

The bundles can be made anytime in advance of your fire ritual.  You can also make them together, as a grove or group of people.  To do your ritual itself, you can choose an aspicious day for your ritual (a full moon, a new moon, one of the wheel of the year holidays, etc).  I used Beltane for my most recent bundles–which are what the photos are of in this post.

 

If you can, I suggest building the fire intentionally and using traditional techniques (or in the least, not starting your fire with fossil fuels like lighter fluid–this is a healing ceremony, and using fossil fuels which are causing so much ecological damage sends the wrong signal and energetically, has issues).

 

Fire ready to accept healing bundles

Fire ready to accept healing bundles

Prior to starting your fire, I suggest that you open up a sacred space using whatever method you typically use (for druids, this might include delcaring peace in the quarters, calling in the four elements, saying the druid’s prayer, and casting a circle or protective sphere around the space). Once you’ve setup your sacred space, light your fire and tend it till you have what you need: good coals you can rake into an open area (for the smoldering bundles) or a blaze (for the burnables).

 

Part 3: Burning Your Bundle and Sending Energy Out

Once you are ready, place your bundle before you.  I like to do an elemental blessing of my bundle at the fire, blessing it with the four elements: earth, air, fire, and water, inviting those elements into the bundle to help with the healing work.  You could do other things here, for example, if you are a reiki practitioner, you could send some reiki energy into the bundle, etc.  You might also raise energy in the bundle in other ways; drumming a steady beat into the bundle also works great.

 

Burning the healing bundle–I let the fire go almost out, then I put it on there and it smoldered for a long time.

State your intentions for the bundle, and offer it to the fire.  Observe as it burns, watching it and seeing if you see any messages within the fire.  As it burns, you want to envision that energy going to where you want it to–that the winds take that energy to the places you wish it to travel.  This may take some time, and my suggestion is to hold space for the duration of the bundle burning and smoldering.  You might also do other things to help the energy get there: drum, dance, sing, etc.

 

Once you are done, close out the space, and if at all possible, allow the fire to burn out naturally.

 

Wildcrafted Yule Tree Ornaments – Painted Wood, Wreaths, Awens, and Pentacles December 2, 2018

As the Winter Solstice is coming up quickly and the tree just went up this past week, I’ve been busy in my art studio and out on the land looking for great things to add to the Yule tree.  As a druid who is deeply concerned about the amount of plastic and “throw away‘ quick purchase items, like cheap plastic ornaments, I didn’t want to buy any ornaments for the tree, but rather, to make them from wildcrafted materials. So today, I wanted to share two simple ways to make nice ornaments for a Yule tree from natural materials and simple tools.

Handmade Stag and Pentacle Tree Topper with Handmade Ornaments

Handmade Stag and Pentacle Tree Topper with Handmade Ornaments

Painted or Burned Wooden Round Ornaments

One simple method for creating ornaments is a painted or woodburned wood rounds. These are simple slices of wood that you can decorate in a variety of ways–painting them, burning them, or staining them.

A variety of wood rounds that are burned or painted. These are just about ready to hang!

A variety of wood rounds that are burned or painted. These are just about ready to hang!

Obtaining Wood:

You can cut rounds from either fresh or dry (seasoned) wood.  Most wood cracks as it dries out, so if you are cutting wood rounds fresh, you want to cut extra because some will crack as it dries.  If it is already seasoned wood, you can cut it without too much concern as the cracks are already present.  Even if you find dry wood in the woods, if its a rainy year, it may still crack a bit as it dries. The longer the wood sits outdoors, the more dark areas it will have and at some point, it will start to break down.

 

You might spend time looking for wood–what I like to do is take a small foldable hand saw with me regularly on my walks or hikes, and if I see a nice piece of wood that has recently fallen, I’ll take a piece of it back with me, using it as a walking stick till I get home.  I store these in my garage, and eventually, I have a nice pile for cutting.   You want fairly long pieces for using the saws (see below).

 

Some of my favorite woods to use are sugar maple, red maple, oak (harder to woodburn), sassafras, walnut, eastern helmock, or cherry.  Different woods produce different grains and colors, which you can all use to your artistic advantage.

 

Cutting rounds: In order to cut your wood rounds, you need either a table saw or miter saw to cut them; you could also use a hand saw but it would be very tedious.  If you don’t have one, ask around; chances are, a lot of people have these saws and would be willing to cut wood rounds for you or let you take 30 min to cut your own. I was without such a saw for many years, but finally invested in my own.

 

Cut your rounds to any thickness or size.  A miter saw also lets you cut them on a nice angle.

 

If you are cutting wet or fresh wood, one of the ways to minimize cracking is to put your freshly cut wood rounds in a paper bag for a few days.  The paper bag slows down the drying and there is less cracking.

 

Regardless, you will want to wait a few days before painting or burning them to make sure they aren’t going to crack.

 

Cut rounds of different sizes and woods.

Cut rounds of different sizes and woods.

 

Decorating Wood Rounds: You can do many different things to decorate your wood rounds. If you have a woodburner, this is a great and simple way to decorate them. You can also paint them with acrylic. Wood stains are not meant to be precise and will likely leak all through your wood, so unless you are staining the round all one color (say, on top of a woodburned design), stay away from traditional wood stains.  Yes, I learned this the hard way!

 

If you are not confident in your drawing skills, two options may help you.  First, you can purchase or make stencils of simple shapes and symbols, and use a stencil technique for your wood rounds.  The second is to print out designs and use a transfer paper (available in any art or craft supply store) to transfer the design, then paint or burn over it.

 

Simple woodburned rounds

Simple woodburned rounds

 

Stick Wreaths, Awens, and Pentacle Ornaments

This second kind of ornament is a little more involved, but produces beautiful results.  For this, you will need some hand clippers or loppers, wire of various colors, wire snippers, and access to various kinds of brush, shrubbery, vines, and/or small sticks. Here’s a photo of what we will be making next.

Some ornaments laying out to dry out

Some ornaments laying out to dry out

Finding the Right Woods

To make these delightful ornaments, you need two kinds of wood: one that is relatively bendy and one that is relatively firm and less bendy. You can test the bendability of wood by trying to bend them in half–if they bend easily, you have a good “wreath” material.  If they snap, that is a good “straight” material.

Bendable material should be able to do this without snapping

Bendable material should be able to do this without snapping

Wreath materials can be a lot of different things: most woody fines work great (Fox grape, other kinds of grape, buckthorn, bittersweet, to name a few).  Willow branches are fantastic for this–look for them of various kinds near wet areas.  Other bushes and shrubbery of various kinds can also be used.  For mine, I used an unidentified shrub (that was planted by the previous owners of the land) as well as some very young dogwood branches (that I needed to cut back anyways near my coop). Ideally, you should be able to bend it at least as far as in the photo above before it snaps (if not more, in the case of many thinner vines, etc).  Thin materials and new growth are best for the smaller ornaments.  These materials *must* be cut fresh and used within a few hours or they will dry out and lose their bendable quality.

 

Straight materials can be anything that you like.  I have some really lovely rose bushes that produce thornless straight branches–I like them for the green color.  Other branches I used this time around were some beaked hazels, cherry, and some maple.

A harvest for wreath materials

A harvest for wreath materials

Plan on harvesting the woods the same day you will make your wreaths and ornaments.

 

Making the Wreath

Depending on the length of your bendy wreath materials, you will likely need 1-3 pieces of material for each wreath.  You will have to coax the material to do what you want it to do.  Start by making a circle of the initial material, tucking in the end so it is held by the wreath.

Making your first loop

Making your first loop

For this, I like to start with the thicker end first, and keep working around, twisting it as I go.  You may have to help the wood bend by slowly bending it till it will keep the bend–each wood is unique.  The stuff I’m working with for this demo was definately less bendy than willow or grape vine, but still did a fine job as long as I was patient.

Wreath - step 2

Wreath – step 2

At some point, you should be able to have the end tuck in around the wreath.  Don’t worry if its completely circular at this point yet–just keep adding material.

Wreath - Step 3

Wreath – Step 3

You can see above where I have a little bend in the wreath material–once I add more, you won’t be able to see the bend.

Wreath 4 - Adding more material

Wreath 4 – Adding more material

Now I’ve added in a second piece.  Don’t yet worry about the ends–we will deal with those at the end.  Keep wrapping the material until you get a wreath the size you want.

Wreath trimming

Wreath trimming

 

As the wood dries, it will become very tight and the wreath will hold together on its own and hold its own shape.  When the wood is wet, however, you may need to secure it with some wire (that you can remove when its dry).  You can also, at this stage, trim any ends that are sticking out (as I am doing so above) or wait till they are dry to trim them.

 

Make as many wreaths as you like!  They are great on the tree on their own, or, you can take it a step further and make an awen or pentacle.

Various wreaths drying

Various wreaths drying, some with temporary wire.  These are made of the unidentified shrub material (tan/green) and some young dogwood branches (red).

Awen Ornament

Choose three straight pieces and cut them to just larger than your wreath.  They don’t have to be perfect at this stage–you can always trim them later.

Cutting branches for an awen symbol

Cutting branches for an awen symbol

Once you have your three straight pieces, begin attaching them at the top.  Simply wrap a thin wire around the branches and the wreath a few times till they are secure.  You could alternatively try to glue them, but I don’t think this is a good idea with shrinkage. Try to attach them as solidly as you can–if you are working with wet wood, they may losen and shrink as they dry.

Close up of awen top

Close up of awen top

Awen attached at top and middle bottom.

Awen attached at top and middle bottom.

Once you have the top attached, attached the middle bottom.  Then you can decide how far out you want the two outer rays of the awen.

Finished Awen ornament

Finished Awen ornament

Pentacle Ornament

Once you get your feet wet with the awen ornament, you can tackle the more complicated pentacle ornament. This is one with rose bush branch and the shrub from my yard.

Pentacle ornament on the Yule Tree

Pentacle ornament on the Yule Tree

For this, you will want five straight pieces that have a little give in them. They should be fresh wood, as you will have to bend them a bit over each other to get the effect right. As an optional step, if your pieces are quite thick, you migth shave them down on one side. This isn’t necessary if you have thinner pieces.

Shaving down edge of pentacle pieces

Shaving down edge of pentacle pieces

Now, begin to construct the pentacle.  Start by attaching two of the pieces to the top of the pentacle.

Two pieces attached.

Two pieces attached.

Here’s how the back of this looks at this stage. You can see how if you shave it, you can get a closer fit.

Top of pentacle with wire

Top of pentacle with wire

Now, 1/5 of the way down from the top, attach the next two pieces at the point of the star.  This gives you two of the five sides attached. You can mess around with which ones should lay on top of each other as you go–some sticks will fit better on top or bottom than others.

Attaching second two pieces

Attaching second two pieces

Now, go ahead and attach the other star point that can be completed (on the bottom right). Next, add in your 5th branch and figure out how to best fit it (it might fit better under rather than over previously attached sticks).  Keep attaching each of the sides.

Pentacle with all five sticks

Pentacle with all five sticks

Finally, attach your last sticks. You work with these wet because at this later stage, you may have to bend them a little to attach them to the wreath together.

Finished pentacle

Finished pentacle

At this stage, let them dry out for at least two days. The wood may shrink a bit, which will firm up your wreaths but may require you to tighten up the wire (which you can do by putting a simple bend in it or re-wrapping it).

 

Once they are dry, if you want, you can brush these with paint or just leave them natural.

 

I hope you enjoyed this simple tutorial for creating wonderful yule ornaments!  If anyone does this, please share a link to your creations or tag the druid’s garden on Facebook or Instagram (@druidsgardenart).  Thanks!